appliance-man
Site Admin
Joined: 30 Jun 2005
Posts: 41
|
 Posted: Thu Jan 04, 2007 7:37 pm Post subject: Electric Range: Top element doesn't work |
 |
|
1. Top element
If the element only works partially or not getting red hot at the "Hi" setting, the problem might be with a burned out receptacle that the element plugs into. If this is the case, replace both the element and the receptacle.
You can usually tell when the element itself burns out. It might have small holes or bubbles on the coil. Replace the element, if found defective.
2. Infinite switch
Another reason, why the element would not start, might be a defective infinite switch (located behind the control panel, with the burner knob on its shaft). Replace the switch if found defective. |
|
